Monday, March 12, 2012

sn0wbreeze v2.9.3

What is New?


  • Added Apple TV 2 support for iOS 4.4.3/4.4.4.
  • Fixed rare issues with iOS 5.0.1 where it would halt on the Apple upon boot.

  • Just adding this in mainly for users who dumped their SHSH blobs. On the initial boot, the Apple TV may have a black screen for 60 seconds after setting up the Apple TV. This is normal.

    Report any issues to iH8sn0w via Email (iH8sn0w@iH8sn0w.com) or Twitter (@iH8sn0w)

    Download sn0wbreeze v2.9.3 Check sidebar for the latest download!

    36 comments:

    1. I have one question. I'm on iOS 5.0.1 i4 which is jailbroken with snowbreeze v2.9.2 and I have that issue where the phone wont boot properly (like you said in this v2.9.3 fix).
      Is there any other solution to fix it or I need to do the whole procedure again of jailbreaking and restoring with v2.9.3
      Also will I be able to restore it again to iOS 5.0.1 now that the iOS 5.1 is out?

      Thank in advance for any kind of help

      ReplyDelete
    2. Doh, just tried the update, but itunes pushed 5.0 (4999) to my ATV2, so looks like stuck now till the jailbreak for 5.0 on ATV comes out

      ReplyDelete
    3. hello iH8sn0w
      Sorry for bad English. English do not know. I use Google translator.
      My unlocked iPhone 3gs, modem firmware 05.16.05, old-bootrom.
      I did a jailbreak using sn0wbreeze-v2.9.3. Untethered jailbreak has turned out. Cydia works fine, iTunes syncs all cracked software, tweaks from Cydia are working.
      It does not work geolocation.
      Does not specify any location on GPS, for no Wi-Fi, or on the towers of operators, the compass does not work either.
      Yandex-maps give the error "Unable to display the current location of the user", Google - do not display the location of the point, as in the Yandex-maps. And in the tray near the battery indicator does not light geolocation.
      There is a solution to this problem?
      Thank in advance for any kind of help.

      ReplyDelete
      Replies
      1. Hi, I got the same problem. After updating custom firmware with 2.9.3, my location services/GPS does not work anymore, and I did not update my baseband to iPad baseband. My baseband is 5.13.04. Hope there's a fix soon.

        Delete
      2. I guess you have the same issue that was mentioned on the dev team blog (blog.iphone-dev.org) a short while ago. The solution is to disable location services at the iOS 5 welcome screen and only turn location on later (in settings).

        Delete
      3. Same problem for me on a 3GS new iboot baseband 5.16.5,

        gps doesn't work, i've tried the "pi_is_awesome" method without sucess.
        i've try too, killall -9 locationd and rm -rf (caches locationd) that will be autocreated when gps is launch, no issue.

        can you make a fix/patch,

        i stop to restore now, because it's long time to make it.

        maybe a untethered solution too ;)

        regards (good job for your jb apps)

        Delete
      4. I had the same after Jailbreaking my Iphone 3gs old bootrom. Most functions are working well except the location services on any of my apps. Is the a patch on the near horizon?

        Delete
    4. hi iH8sn0w im writing this post so i can clarify that the sn0bereeze 2.9.3 is very bugy still i restore my iphone 3gs yesterday with a custum firmwire made by the latest version of sn0bereeze everything went fine and the phone rebooted as usual untethered since i have a old bootroom 3gs ,the phone is being so slow as hell acting up thge most of the time, cydia is there and i didnt instal anything yet that i can say maybe its a tweak or anything else ,the phone wont reboot sometimes by it self i need to try boot it by pressinf home button and power button and it work but the phone is still slow ,i tried reseting all setting but no luck .i restored the phone 2 times same way and same bugs and issues .i find it weard since i never had any prob before with using oldest version of sn0bereeze because it was being so far my best tools to jailbreak ever its easy and fast preserve the basband and do what it is suppose to be done ,im just not happy this time with it. to be sure what the probleme i tried to restore the phone again just with with a firmwire but just in preservation of basband mode and the phone is working perfect the basband is fne and the phone is 100/100 fast no bugs ,so i think it is the jailbreak process that is doing a probleme .i want to write this post with more detail so i can help in testing. i realy apreciatte your hard work iH8sn0w kepping in working hard and thanks in advance

      ReplyDelete
    5. Hi,

      I don't manage to create the custom IPSW with sn0wbreeze 2.9.3 (and neither with the version 2.9.2). Sn0wbreeze says that the file "will be created on the desktop" but I can't find it anywhere… What am I doing wrong?

      Thanks in advance
      Patrik

      PS: iPhone 3Gs old bootrom with iOS 5.1

      ReplyDelete
    6. I have a AppleTV2 with 4.4.2 and I'm stuck. I see that the last snowbreeze can support all the version except 4.4.2. We are a lot who are stuck with this version. Can you please release a version who supports 4.4.2 ? thanks, Chris

      ReplyDelete
    7. any news on building 5.1 signed firmware?

      ReplyDelete
    8. Hello evrey buddy, I'm asking about how to Untethered jailbreak my iPhone 4G by Snowbreaze after updated to iOS 5.1 ?

      ReplyDelete
    9. Hi Could you help me please ?

      I'm trying restore mi Iphone 3gs (32gb baseband 6.15). with 5.0.1 firmware

      I used snowbreeze 9.2.3 and I created a custom firmware, but when i'm goint to iTunes.. the screen throws error 1600 message.

      I have already used iReb, but nothing do.

      What's the problem ?

      I could upgrade firmware with 5.1 firmware, but my iPhone doesn't recognized my chip... I installed ulstranow fixed.. but does'nt work..

      thank's

      ReplyDelete
    10. i have a question-.. i need to know when i could find a jailbreak untethered for iOS 5.1 on iPad 1 (16 GB)?. or tell me if sn0wbreeze in another version, release a jailbreak untethered very soon...
      if my question have any answer..:
      can contact to me:
      argelalfaro@hotmail.com
      really i need a answer very soon
      Thanks very much

      ReplyDelete
    11. Hey guys! Will Gevey Pro Sim work on iOS 5.1 with the preserved baseband 4.10.01? I'm currently at firmware 4.3.3. THANKS! Happy 2nd anniversary sn0wbreeze! Please answer me here: pelio_14@yahoo.com

      ReplyDelete
    12. This works well with one exception: Location services no longer works - at least not for 3GS phones.

      ReplyDelete
    13. Why is it that some apple tv 2 i can drop the shsh everytime but others i cannot get it no matter how many times i try?
      For example: I have a APT2 4.2.2 (4.3) and cannot get the shsh blobs at all but yet this 4.4.4 I can drop every time.

      ReplyDelete
    14. guys i get this error 1600 even after enter to pwnd dfu mode
      i can't update by CFW :(
      any New Idea

      ReplyDelete
    15. Where the option is for "install ipad baseband" on sn0wbreeze, does this just add in the step after the custom IPSW is created? Or does this download the file and include it on the IPSW so when you go to jailbreak/unlock, it's already on the phone and takes less time?

      Thanks,

      Dustin
      MyCrazyPhone

      ReplyDelete
    16. any news on a ipad 3 jailbreak beta

      ReplyDelete
    17. bug report:
      it works well in any language except chinese!
      I've sent you the crash log & crash report!
      Any solutions?
      Thanks very much!

      ReplyDelete
    18. please sn0wbreeze for iphone 4S...

      ReplyDelete
    19. I have done the whole process succesfully using the link below and used the phone for some days...but now my phone is stuck in recovery mode and when i try to restore it with custom ipsw again, it gives error 1600 in itunes..what should i do to recover my phone?

      http://www.iphonejailbreak.me/jailbreak-and-unlock-iphone-3gs-on-ios-5-1-using-sn0wbreeze-custom-firmware

      ReplyDelete
      Replies
      1. same problem for me too. i turn my phone on once and then it stuck in recovery mode. by clicking just boot in redsnow the screen turns white and nothing ahead.. plz help

        Delete
    20. This comment has been removed by the author.

      ReplyDelete
    21. Does SnowBreeze Support iOS 5.1 on IPhone 4

      ReplyDelete
    22. sn0wbreeze 5.1.1(3gs old) When will you get support?

      ReplyDelete
    23. please release support for 5.1.1 now that 5.1.1b is out

      ReplyDelete
    24. oh and please release a way to include the xml scheme from 5.0.1 into 5.1.1 and 5.1.1 (9B208) minus any webkit vulnerabilities and full spite and spite fix pack compatibility, thanks!

      ReplyDelete
    25. i used sn0wbreeze for my iPhone 4 ,then used iTunes and installed 5.1
      now my iPhone don t recognize any Sims card ,and i am stacked with a black screen that says insert original Sims card. i can used only for emergency calls

      ReplyDelete
    26. I purchased Apple TV 2G with 4.4.4(3330). I used SeasonPass but downloaded latest firmware and did jailbreak and also installed XBMC but I was not able to get any Cable channels or free live channels. So Can anyone tells me how to preserve baseband and update to current firmware? Because I saw comments that should not update the firmware. Also please send me instructions how to install the XBMC and other plugins.

      Thanka in advance.
      BUP

      Thanks in advance

      ReplyDelete
    27. hi
      i m re restoring iphone 3gs 5.1.1 old bootroom
      getting error 2624
      plz tell how to fix

      ReplyDelete
    28. I tried to iphone factory unlock my phone after I jailbreak it but it didn't work. So I had my iphone factory unlock at Jailbreakhome.com. 100% working and it is a permanent unlock too.

      ReplyDelete